Aston
®
Tire Changer ATC-5800 User’s Manual
|
20
www.astontechusa.com
◇
Use the Wheel Clamp Foot Pedal to move the Clamps inward (pedal down) or outward
(pedal up).
4.2.3 Tire mounting
◇
Apply tire manufacturer’s approved rubber lubricant liberally to entire circumference of
both upper and lower beads after loosening bead and placing on table top.
◇
After the wheel is secured to the Turntable, swing the Vertical Arm into position. Use
the large adjusting Knob to position the Mount/Demount Head directly over the edge of
the rim.
◇
Push the Vertical Shaft down and position the Mount/ Demount Head into contact with
the rim edge.
◇
Pull the locking handle towards you to lock the Vertical Shaft into position. As the slide
is locked, the Mount/ Demount Head will move upward approximately 1/8 inch and
backward 1/8 inch from the rim edge. The Mount/Demount head roller should not be in
contact with the rim edge.
◇
Place tire/wheel assembly on Table Top with mounting side up.
