ASTi ACE-RIU, Техническое руководство пользователя

Страница: 29 / 31

Appendix A: Set up Radio Bridge and Remote Con-
trol
The ACE-RIU is sold in two different configurations:
l
Operator ACE-RIU:
interface module for operator stations. The device is labeled
“ACE-RIU.”
l
Radio ACE-RIU: interface module for live radios. Used with Voisus Radio Bridge and
Remote Control. The device is labeled “Radio ACE-RIU.”
Each ACE-RIU is preset before shipping. If you wish to verify the settings or change the con-
figuration, follow the instructions below.
A-1 Set up internal jumpers
Access the ACE-RIU's internal board. Instructions can be found in Section 8.1, "Access the
ACE-RIU's internal board" on page 18. Adjust the internal jumpers to the values listed below
for an Operator ACE-RIU or Radio ACE-RIU.
Important
: This operation must be performed at an approved ESD station to avoid dam-
aging the equipment and voiding the manufacturer warranty.
Description Jumper Settings Operator ACE-RIU Radio ACE-RIU
Input Gain, Channel A J1 40 dB 0 dB
Input Gain, Channel B J2
Input Gain, Channel C J3
Input Gain, Channel D J4
Output Coupling, Channel A J5 OPEN OPEN
Output Coupling, Channel B J6
Output Coupling, Channel C J7
Output Coupling, Channel D J8
Copyright © 2022 Advanced Simulation Technology inc. 23
ACE-RIU Technical User Guide (Rev. K, Ver. 4)