Astera LED Technology GmbH
Technical Reference Manual for FP1 Titan Tube 2020-08-26
Page | 7
4.1
M
OUNTING
A
CCESSORIES
The Titan Tube offers a variety of mounting options via customized accessories.
4.1.1
Floorstand
For a quick vertical setup, the floorstand can be
screwed onto the tube via one of its M5 threads.
The floorstand can be folded together for a
convenient transportation.
Please note
: the M5 threads are not designed
for several tubes to be screwed together to form
one long tube element.
4.1.2
Holders
The silver Astera metal holders fit around the Titan Tube.
To prevent them from opening, they can be locked in
with metal pins.
The holders have a 1/4”
-20 thread so that
Astera’s
double-ended spigot (AX1-BLT) can attach the holder to
a Manfrotto Super Clamp. Also, holders can be fixed
with a screw to a wooden wall or board. Holders also
have 2 M5 threads for the eyebolts mentioned below
4.1.3
Wing Plate
The Wing Plate is designed to attach two holders
onto its surface. It can be mounted with just one
of Astera’s double
-ended spigots.
The holders on the Wing Plate can be aligned in
parallel if one Wing Plate is used with one tube.
In addition, the holders on the Wing Plate can be
turned 45
°
or 90
°
. That way two tubes can be
connected together in different angles.
Wing Plates manufactured after March 2019
offer the possibility of 60
°
anles so that they
can be used to arrange tubes in triangles.
For this, the screws of the wing plate need to
be moved to the inner holes which are marked
with triangles. For hanging, Astera recommends
that customers buy standard eybolts with 1/4” thread.
