ASTEL TSA 082, Руководство по эксплуатации

Страница: 8 / 16

8
SET-UP
Set-up is made by the help of the LED display located on the front panel of the unit. Numerical codes are
used to locate the selected setting. All settings are as follows:
1 - CHANNEL B mode (normal, VCR-CLOCK, frame-by-frame)
2 - CHANNEL B sequential time (1 - 90 sec.)
3 - CHANNEL B number of inputs (1 - 8)
4 - CHANNEL B frame number (1 - 99 frames)
5 - ALARM activity (CH-A, CH-B, off)
6 - ALARM sequential time (1 - 90 sec.)
7 - ALARM duration time (1 - 90 sec.)
8 - ALARM frame switch (on/off)
9 - ALARM triggering (negative/positive)
A - REMOTE CONTROL (on/off)
b - LINE LOCK PHASE(-127 to +127)
C - SAVE the SET-UP (yes/no)
Switch off the unit. Press the key "8" and turn the power on. All LED lamps go off, power switch lights. In
the LED display number
"1"
(CHANNEL B mode)
is appeared.
Press "
•
":
"0."
(mode selecting)
The dot in the right corner is appeared, adjusting is allowed. Use keys "
∨
" and "
∧
" to select the
CHANNEL B mode. The dot in the right corner is blinking, the LED display shows the selected mode -
"0" for normal mode, "1" for VCR-CLOCK and "2" for frame-by-frame switching.
Press "
•
" to return to main settings. Press "
∧
" to select next setting:
"2"
(CHANNEL B seq. time)
Press "
•
":
"0."
(seq. time adjusting)
Set the number of inputs by pressing up/down selectors. The LED display shows the selected sequential
time - "0" for 1 to 9 sec., "1" for 10 to 19 sec. etc.
Press "
•
", select the next setting:
"3"
(CHANNEL B number of inputs)
Press "
•
":
"8."
(set the number of inputs by pressing up/down selectors))
Press "
•
", select the next setting:
"4"
(CHANNEL B frame number)