ASTECH TX31D/1/IFM, Руководство по эксплуатации

Страница: 4 / 43

TM Page 4
4.3.11 Tachometer Settings Menu 27
4.3.11.1 Set the Number of Tachometer Flags 27
4.3.11.2 Set the Full Scale RPM 27
4.3.12 Decoder Settings Menu 28
4.3.12.1 Set the transmitter type 28
4.3.12.2 Set the Output Calibration Mode 28
4.3.12.3 Set the OLED Display Brightness 28
5 INDUCTIVE POWER SUPPLY & TRANSMITTER INSTALLATION 29
5.1 Inductive Head IH2 or IH2/L with shaft mounted power pickup loop 30
5.1.1 Inductive Head IH2 or IH2/L with Power Pickup Loop in Split-Ring Assembly "TX.MTGS" 30
5.1.2 Suggested Installation for Inductive Head IH2-IH2/L with Power Pickup Loop in Split-Ring
Assembly 31
5.1.3 Inductive Head IH2 or IH2/L with Power Pickup Loop Wound onto Shaft Using CAK Kit 32
5.1.4 Suggested Installation Sequence for Inductive Head IH2 or IH2/L with Transmitter & Power
Pickup Loop Using CAK Kit: 32
5.2 Inductive Loop IL2 with shaft mounted power pickup loop or ip2 pickup 33
5.2.1 Inductive Loop IL2 with Power Pickup Loop in Split Ring Assembly "TX.MTGS" 33
5.2.2 Suggested Installation Sequence for Inductive Loop IL2 with Power Pickup Loop Integrated in
Split-Ring Assembly 34
5.2.3 Inductive Loop IL2 with Power Pickup Loop Wound onto Shaft Using CAK Kit 35
5.2.4 Suggested Installation Sequence for Inductive Loop IL2 with Transmitter & Power Pickup Loop
on Shaft Using CAK Kit: 36
5.2.5 Inductive Loop IL2 with Inductive Power Pickup IP2 on Shaft Using CAK Kit 37
5.2.6 Suggested Installation Sequence for Inductive Loop IL2 with Transmitter & IP2 Power Pickup
on Shaft Using CAK Kit: 39
6 SYSTEM CHECKOUT 39
6.1 Non-Operation 40
6.2 Improving Efficiency of Inductive Power Supply 40
6.3 Attaching transmitter/IP2 pickup module on small diameters 41
6.4 Dimensioned drawings of IH2 & IL2 42