ASTEC KPI-JCI FT4240, Сервисный бюллетень

Страница: 6 / 6

DESCRIPTION QTY PART NO. ITEM
PL .50 X 12.27 X 12.27 4 317436 1
PL .38 X 6.50 X 14.80 2 317440 2
3
SHEET DRAWING NUMBER
700 WEST 21st STREET P.O. BOX 20 YANKTON, SOUTH DAKOTA 57078
TITLE DATE
DATE
DATE
DRAWN
MODELED
APPROVED
SCALE
ECN DATE REVISION
REVISIONS AND PATTERN CHANGES
NO BY
THIS PRINT IS THE PROPERTY OF KOLBERG-PIONEER INC. AND IS SUBJECT TO RECALL AT ANY TIME,
AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THEIR INTEREST. BETWEEN FINISHED SURFACES ± 0.010"
DETAIL DIMENSIONS: ± 0.06
TOLERANCES - UNLESS NOTED: NOTICE:
MATERIAL WEIGHT
317442
REPAIR; FRAME #264384, FT4240
7/6/2011 BHF
.125=1
1
1
BHF
7/7/2011
ALSO FITS FRAME 319860
KPI-JCI
ASTEC COMPANIES
(5/16)
TYP
5/16
TYP
TAPER WELD 2:1 ON ENDS (TYP) 2
1
GENERAL REPAIR PROCEDURE BY A CERTIFIED WELDER:
1. IF EXISTING, REMOVE PREVIOUS REPAIR PLATE (SIMILAR TO ITEM #1).
RECOMMEND GRINDING OFF AS TO NOT DAMAGE MAIN FRAME STRUCTURE.
2. IT IS VERY IMPORTANT TO ARC GOUGE THE CRACKS, THEN WELD AND
GRIND FLUSH. ALSO REMOVE THE WELD ON THE BACK SIDE OF THE FLANGE,
IN THE LOCATION OF THE NEW PLATE (ITEMS 1 & 3) THEN GRIND A BEVEL AND
REWELD. NEW WELD IS TO BE FLUSH WITH THE SURFACE OF THE FRAME SIDE
SO THAT PLATES (ITEMS 1 & 3) CAN SIT TIGHT AGAINST BACK SIDE OF FLANGE.
3. POSITION ITEMS 1 AND 3 AGAINST THE BACK SIDE OF THE EXISTING
FLANGE. THE BEVEL WILL BE ON THE OUTSIDE. WELD AS SHOWN.
4. POSITION ITEM 3 AND WELD AS SHOWN. PLEASE NOTE THAT THE WELD
MUST HAVE A 2:1 TAPER ON THE ENDS AS TO NOTE CAUSE STRESS
RISERS ACROSS THE TENSION FLANGE.
5. REPEAT PROCESS ON OTHER SIDE.
1
#1, 317436 (4) WAS (2); DELETE #3, 317441 (2); ADD WELD SYMBOL 10-24-12
SPM
26737
5/16
TYP
1
1
1