Architects’ and Engineers’ Specifi cations
The microphone will be a mini-gooseneck condenser
type. The frequency response will be 70Hz-18KHz. The
microphone will have a line-cardioid polar pattern utilizing
Astatic’s exclusive Locus
TM
technology.
The sensitivity of the microphone will be –30dBV (32mV)
@ 1 Pa. The microphone will have a professional 3-pin male
XLR connector that also contains the electronic circuitry.
The microphone will operate from P12, P24 or P48 standard
phantom power consuming 2mA.
The microphone element and electronics will be enclosed
in a radio frequency resistant housing meeting or exceeding
specifi cation EN55103-2. The microphone will be 1/2" [13.0mm]
in diameter at the capsule and 3/4" [19.0mm] in diameter
at the base. The fl exible gooseneck will be 5/16" [8.0mm]
in diameter. The overall length will be 10 -15/16" [278.5mm].
The microphone will have a durable matte-black urethane
fi nish. A locking-fl ange mount and foam windscreen will be
supplied as accessories.
The microphone will be RoHS compliant.
The Astatic model 905R is specifi ed.
905R
Line-cardioid Condenser Mini-gooseneck Microphone
Two-Year Limited Warranty
Astatic Commercial Audio Products hereby warrants that this product will be free of defects
in material and workmanship for a period of two years from the date of purchase. In the
unlikely event that a defect occurs Astatic will, at its option, either repair or replace with a
new unit of equal or greater value. Retain proof of purchase to validate the purchase date
and return it with any warranty claim.
This warranty excludes exterior fi nish or appearance, damage from abuse, misuse of the
product, use contrary to Astatic’s instructions or unauthorized repair. All implied warranties,
merchantability, or fi tness for a particular purpose is hereby disclaimed and Astatic hereby
disclaims liability for incidental, special or consequential damages resulting from the use or
unavailability of this product.
This warranty gives you specifi c legal rights and you may have other rights that vary from
state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above exclusions and
limitations may not apply to you.
Note: No other warranty, written or oral is authorized by Astatic Commercial Audio Products.
If outside the United States, contact your local dealer or distributor for warranty details.
©2008 Astatic Commercial Audio Products
Part No. 46873-89-00 Apr2008
Specifi cations
†
Operating Principle
............................................ Condenser
Polar Pattern
..................................................... Line-cardioid
Frequency Response
....................................... 70Hz -18KHz
Sensitivity
......................................... -30dBV (32mV) @ 1 Pa
Impedance
............................................................ 300 ohms
Maximum SPL
.................................126dB, 1% T.H.D., 1KHz
Self Noise
................................................................... 18dBA
Power Requirements
............................P12, P24, P48, 2mA
Connector
............................................. 3-pin male XLR type
Polarity
................................ Positive pressure on diaphragm
corresponds to positive voltage
on pin 2 relative to pin 3.
Finish
......................................Durable matte-black urethane
Dimensions
.....................................................(See drawing)
Net Weight [Mass]
......................................... 4.3oz [0.12Kg]
Packaged Weight [Mass]
...............................8.0oz [0.23Kg]
RF Immunity
......................... Meets or exceeds EN55103-2,
E1, E2, E3 and E4
RoHS Compliant
†Specifi cations subject to change without notice.
Frequency Response
Polar Pattern
For warranty issues visit cadaudio.com and select the support tab.
