TUNING PROCEDURE
STEP 1
Turn on the TV.
NOTE:
You 'd better select the correct frequency system, color and sound system for the first channe before searching.
Detailed discreption is said below.
There are 4 frequency system can be used, such as STD,HRC,IRC,AIR.
In AIR mode, the set receives antenna signals;
In STD/HRC/IRC mode the set receives Cable TV programs.Please select:
AIR: If using VHF/UHF antenna.
STD,HRC,IRC:If using Cable TV.
-18-
OPERATION INSTRUCTIONS PART II(VIDEO)
STEP 2
AUTO MEMORY
1. Press the MENU button on your TV (or remote controller) three times to enter TUNING menu.
If it is in VIDEO/S-VEDIO/YCbCr /PC mode, it can't enter TUNING menu.
2. Press Buttons to select "AUTO MEM." then press button to automatically search and store all the signals
in your area. broadcasting TV When presetting complete, the initial position number will reappear.
TO SKIP A PROGRAM
You may skip any program number by following the steps below:
1.Select the program number to be skipped by pressing CH+/CH- button or number button .
2.According to mentioned steps above, enter TUNING menu.
3.Press
b uttons to select "ADD /ERASE", then select "ERASE" by
b uttons.
4.When the skip is off, it indicates that this channel is not skipped.
STEP 3
FINE TUNING
If signal is weak, the fine tuning is necessary.
1. Enter the cha nnel you want to by CH+/CH- buttons or NUMBER KEY(0-9).
2. According to mentioned steps above, enter TUNING menu.
3. Select "FINE" by
button.
4. Press
buttons until the best possible picture and sound are obtained.
NOTE
:
You can execute these operations only if a tuner box is connected to the TV.
NOTE:
If the chann el is skipped,you can't obtain it by CH+/CH-. But you can get it by u sing NUMBER KEY(0-9).
1
1
STD
STD
