M A N U A L C O N F I G U R A T I O N
26
All times:
You can choose this mode if you want the alarm function to be activate at all
times.
*Please click Apply to save your changes.*
Motion Detection
In this section, you can setup up to four different motion-sensitive
windows
.
For example, in the picture above, 2
windows
are activated.
First, to activate a window, click on the checkbox next to “Window 1”. A window will
appear. Then you can specify the size of this window by hovering over the lower right
corner of the window until a double-headed arrow appears. Click and drag that
double-headed arrow to form the window size you want. You can also adjust the
placement of your window by clicking anywhere inside the window and dragging it to
where you want it to be. This window has a small number “1” in the upper left hand
corner to indicate that it is “Window1”.
Next, you can choose the sensitivity of motion detection by using the sliding bar titled
“Sensitivity”. As you slide the bar to the left, the number goes down to 0; if you slide
the bar to the right, the highest number is 75. A lower number means that the window
will not be very motion-sensitive; a higher number means that the window will be
extremely motion-sensitive.
*Please click Apply to save your changes.*
