background image

Copyright 2004-2005 

TSA 6000-USB 

Version 1.0 

 

  

- 10 - 

  

 

7.3 FCC & Industry Canada Notices 

 
This unit has been tested and found to comply with the limits for a Class A digital device as specified in 
Part 15 of FCC rules.  These limits provide reasonable protection against radio and TV interference in a 
residential, commercial, or light industrial area.  However, your equipment might cause TV or radio 
interference even when operating properly.  To eliminate interference, try one or more of the following 
corrective measures: 

• 

Relocate or reorient the TV or radio. 

• 

To the extent possible, increase the distance between the equipment and the TV or radio. 

• 

Use outlets on different electrical circuits for the equipment and the TV or radio. 

 
This Device complies with Part 15 Class A of the FCC Rules and ICES-003 Class A Canadian EMI 
requirements.  Operation is subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) This device must accept any interference received, including interference 
that may cause undesired operation. 
 
Cet appareil num

é

rique de la Classe A est conforme à la norme NMB-003 du Canada.

 

 

 
Warning: Changes or modifications not expressly approved by the party responsible for compliance could 
void the user’s authority to operate the equipment. 

 
 

7.4 EU Directive Compliance 

 

 

 

 
The CE mark is affixed to this product to confirm compliance with the following European 
Community Directives: 

1.  Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of 

Member States relating to electromagnetic compatibility; and  

2.  Council Directive 72/23/EEC of 19 February 1973 on the harmonization of the laws of 

Member States relating to electrical equipment designed for use within certain voltage 
limits. 

 

7.5 Copyright 

 
This publication may not be reproduced, in whole or in part, without prior expressed written 
permission from AST Technology Labs and Embedded Systems Products Inc.  All rights 
reserved.  Copyright 2002/2003/2004/2005 by AST Technology Labs and Embedded Systems 
Products Inc.  All rights reserved.  Patent pending. 
 
AST Technology Labs and Embedded Systems Products Inc. make no representations or 
warranties with respect to the contents hereof and specifically disclaim any implied warranties of 
merchantability or fitness for any particular purpose.  Furthermore, AST Technology Labs and 

Содержание Embedded System Products TSA6000-USB















Отзывы: