background image

Using the CD-ROM Drive   31

Using the CD-ROM Drive

Some Ascentia M computers ship from the factory with a 
CD-ROM drive included. The CD-ROM drive fits into the 
computer’s SmartBay. For information on installing the 
CD-ROM drive, see “Using the SmartBay” on page 27.

Compact discs are designed so that you can easily insert one into 
the computer when you need it, and then remove it:

1.

Press the button on the CD-ROM drive, and the tray 
slides out. (Do not lean on the tray; it does not support 
much weight.)

2.

Insert a CD, label side up (or remove a disc, if you have 
finished using it).

3.

Push the tray in gently to close the drive tray (Figure 14).

A light on the drive tray is on when the computer is 
reading from a CD. Do not remove a disc when this light 
is on.

Figure 14.  Using the CD-ROM Drive

Install and start a CD-based program as you would a program 
on a floppy disk. See your operating system documentation for 
more information on running programs.

Volume
adjustment
dial

Button

Light

Emergency 
eject button

3754-1.bk : 3754-2.fm  Page 31  Wednesday, July 30, 1997  2:33 PM

Содержание Ascentia





























































































































Отзывы: