2
:: Introduction
:: RC14B / 14T RTR Features
:: Additional
:: Other Helpful Items
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations.
New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before
you start to build.
• 2.4GHz 2-channel radio system
• High-Torque Digital Servo with spring-style servo saver
• Powerful Reedy 4500kV Brushless Motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Three sealed differentials
• Threaded coil over shock absorbers
• Adjustable turnbuckles
• Adjustable inserts for caster blocks and rear hubs
• Aluminum steering rack
• Front universal driveshafts
• Sleek and stylish body
• Molded tub chassis with covered center driveshaft
• Aluminum center driveshaft
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebook.com/TeamAssociated/
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Your new Reflex 14B/14T RTR comes assembled. The following items are needed for completion
• 6-cell NiMh or 2 LiPo battery • Suitable battery charger
• (4) AA batteries
Tools included: • Multi-wrench
• Silicone Shock Fluid (Refer to catalog for complete listings)
• Silicone Diff Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737)
• Reamer / Hole Punch (#1499) • Shock Pliers (#1675)
• Wire Cutters
• FT Hex/Nut Wrenches (AE Part # 1519)• Needle Nose Pliers
• Hobby Knife
• Soldering Iron
• Calipers or a Precision Ruler
• Green Slime shock lube (AE Part # 1105)
• FT Dual Turnbuckle Wrench (#1114) • FT Universal Tire Balancer (#1498)
:: Table of Contents
1................... Cover
2................... Introduction
3...................1:1 Hardware “Fold Out”
4 - 5............. Quick Start Guide
6 - 17............Steps 1- 36
18.................Tuning Tips
19 - 25....... Catalog
26................ Back Cover
:: Notes
This symbol indicates a special note or instruction in the manual.
!
There is a 1:1 hardware foldout page in the front of the manual. To check
the size of a part, line up your hardware with the correct drawing until you
find the exact size. Each part in the foldout has a number assigned to it
for ordering replacement parts.
