
2
:: Introduction
:: KIT Features
:: Additional
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebok.com/TeamAssociated/
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new RC10F6 Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.
Features in the RC10F6 Kit:
• 2.5mm graphite chassis for superior flex characteristics
• Front and rear wings modeled after 2017 F1 rules included
• Genuine Fox Kashima Coated center shock for minimal friction and extended wear
• Chassis design allows for multiple battery configurations
• New center pivot design for optimized rear pod assembly
• Light weight graphite axle for increased durability and rigidity
• Differential thrust bearing assembly for smooth action and extended life between rebuilds
• Rear axle accepts all standard spur gears without adapter
• Two steering bellcrank options for fine tuning Ackermann and steering rate
• Servo mounts can be switched from “fixed” to “floating” to allow more flex in the front of the chassis
• Integrated droop posts for adjusting droop without disassembly
• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body scissors (AE Part #1737)
• Silicone Diff Fluid (Refer to catalog for complete listings)
• Reamer/Hole Punch
• FT Hex Wrenches / Nut Drivers (AE Part #1518, 1519)
• FT TC Ride Height Gauge (AE Part #1452)
• FT Turnbuckle Wrench (AE Part #1114)
• Hobby knife
• Needle nose pliers
• Wire cutters
• Soldering iron
• Calipers or a precision ruler
Your new RC10F6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):
• 1:10 scale electric motor
• Electronic speed control
• 3.7V-7.4V LiPo, or 6.0V LiFe with “shorty” battery dimensions
• Battery charger
• 2-channel surface transmitter
• 2-channel receiver
• 1:10 scale formula wheels and rubber (or foam) formula tires
• Steering servo
• Polycarbonate specific spray paint for body
• 1:10 scale polycarbonate formula body
Содержание RC10F6
Страница 1: ......