4. LED light blinks fast: under pairing mode.
Fail Safe
Fail safe feature build in receiver. When receiver stop communication with
transmitter, ESC will stop outputting, then steering channel output will maintain the
latest position.
Low Voltage Protection
The receiver has built-in low voltage protection.
If the battery voltage is less than 3.3V, the receiver enters the low voltage
protection mode and the motor output maximum speed is limited to 50%.
If the battery voltage is less than 3.1V, the motor will stop running.
Installation and Use Guide
The remote control is a 2.4G wireless products, a proper installation and usage
will exert influence on performance of the product.
Due to the poor penetration of 2.4G signals, it is necessary to ensure that
transmitters and receivers are used without occlusions in order to ensure reliable
communication;
A build-in 2.4G signal receiving module inside the receiver, so keep it away as
far as possible from other electronic products, motors, etc., to reduce interference;
The remote controller receiver and transmitter has an PCB antenna, keep any
metal materials away near the antenna.
As the radio frequency products are affected by the external environment, the
performance differences vary greatly. The main points of installation and use are to
ensure that the RF signals of the remote controller can be transmitted effectively and
reliably.
Proper installation and use are essential to ensure product performance.
Summary: FS-GT15 Rx radio system is a high performance and multiple
functions for RC cars. The built-in receiver and ESC make FS-GT15 Rx become
a high degree of integration with complex functions product, please be sure to
carefully read the user manual in using, avoid wiring error caused damage to the
product.
