Associated Electrics 80945 Скачать руководство пользователя страница 2

Страница: 2 / 30

:: Introduction

:: KIT Features

:: Additional

:: Other Helpful Items

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.

Features in the RC8B4 Kit:

• Innovative front-end geometry with new 8° inclined kingpin steering blocks are paired with a new wider upper suspension arm
pivot for improved steering balance and predictable handling in all conditions
• New gearboxes are specific to front and rear
• All new front lower, front upper, and rear suspension arm designs
• New rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape,
and extra clearance for shock position adjustment
• New rear wing has more vertical fins for increased straight line stability, a taller rear lip height for increased downforce,
increased strength in various areas to reduce bending fatigue, and dimples on the backside as a template for cutout holes
• New rear chassis brace has several design features and flex options
• New rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning.
The standard bearing size used is an 8x16x5mm flanged but the hub will still accept 15x21x4mm bearing for tuning options.
• New fuel tank with many new features
• New steering bellcranks with top-mounted steering rack for extra clearance around gearbox assembly
• New aluminum steering rack designed around the updated front end geometry is lightweight and durable
• New steering bellcrank nuts are longer to reduce drag from the steering rack under flex
• Updated steering servo linkage features a new heavy duty threaded ball and steel screw joint
• New A and B blue aluminum suspension arm mounts are shaped to interlock with the RC8B4 chassis
• New RC8B4 specific 7075 aluminum hard anodized chassis features updates to strengthen the front and rear droop tab areas
and an increased width along kick up area
• New upper suspension arm link mount is significantly wider than RC8B3 series, providing the required geometry for the new
8° steering blocks
• New front shock tower has strength improvements and allows for the upper suspension arm insert to be mounted from front
side via a recessed pocket, without disassembly of the tower from the gearbox
• New carbon fiber front top plate centralizes the front chassis brace for balanced flex in all directions
• New front body post is recessed into the front top plate and the reversible design is easy to mount
• New spring cups and shock rod end design has a locking screw to keep the cups in place during a crash
• New front shock bushings are 1.5mm longer, and rear shock bushings are 4mm than RC8B3 shock mounts
• New exhaust hanger mount and spring
• New carbon fiber radio tray brace for repositioned steering servo
• New brake pads and a new brake rotor design that has clearance to accept a 14mm driveshaft pin for longer outdrive life
• New two-piece rear body post features a rubber grommet to allow some flex to extend the life of the body

Your new RC8B4 Kit comes as a kit. There are some items you will need to complete your kit (refer to website for suggestions):
• 4.8-7.4v receiver battery (Flat style NiMH, Flat style LiPo, Flat style LiFe)
• 2 or 3 channel radio/transmitter set with switch (2.4GHz recommended)

• Transmitter batteries

• Throttle and Steering servos

• Polycarbonate-specific paint • Reamer / hole punch

• Model car fuel (20-30% nitro recommended)

• Starter box - (#1751)

• Glow igniter - (#27377)

• .21 class rear exhaust engine

• Exhaust system

• Needle-nose pliers

• 1:8 scale buggy wheels / tires

• Fuel bottle - (#1747)

• Hobby knife