Associated Electrics 7081, Руководство и каталог

Страница: 16 / 38

16
:: Shock Build - Bag F 4/5 - Step 4
:: Shock Build - Bag F 6 - Step 5
:: Shock Build - Bag F 3 - Step 3
Step 1-3 Step 3-4
Front
Shocks
Rear
Shocks
Step 5-6 Step 7
Shock Bleeding Steps:
1. Pull shock shaft down.
2. Fill shock body 3/4 full with silicone
fluid.
3. Slowly move the shock shaft up and
down to remove air from under piston.
4. Wait for bubbles to come to surface.
5. Fill shock body to top with silicone fluid.
6. Place a drop of oil in the cap and on
cap threads.
7. Install cap and tighten completely.
8. Slowly compress shaft all the way to
the top. If there is pressure at the top
of the stroke, there is too much oil or
air. You must bleed it out.
9. Slowly pull shaft out.
10. Unscrew the cap 3/4 turn and tilt the
shock at a slight angle.
11. Slowly compress the shaft to push
out excess oil and air. You should see
bubbles coming out from under the
cap.
12. With the shaft compressed, tighten
the cap and re-check for pressure at
the top of the stroke. If there is still
pressure, repeat steps 9 thru11.
.12. 03
x1 x1
.25. 25 .06
x1 x1 x1
6926
4-40x5/8
SHCS
6925
4-40x1/2
SHCS
6475
Spring Cup
6473
Shock
Bushing
6473
Shock
Bushing
6472
Shock
Mount
Nut
6472
Shock
Mount
Nut
8846
Preload
Spacers
6475
Spring
Collar
7425
Front Spring
(Gold)
6480
Rear Spring
(Green)
Shock fluid
#5422 Shock fluid
#5422
6441
Shock Cap
(Molded)