Page 7 of 38
O
Overflow
P
Overflow means that aspirate is sucked into the interior of the device.
Processing
R
The processing procedure is required for each new patient. The term
processing means that all parts that have (potentially) come into contact with
the aspirate must be cleaned, disinfected and replaced if necessary.
Reconditioning may only be performed by ASSKEA GmbH or by a service
partner authorized by ASSKEA GmbH.
resp.
Abbreviation for `respectively´
Purpose
1.5
1.5.1
Intended use
The
ASSKEA secretion aspirator proVisio
®
M28
is a network-independent mobile medical
aspirator and serves for temporary and primarily spontaneous aspiration of aspirate from the
trachea. The
ASSKEA secretion aspirator proVisio
®
M28
is not operational in motion and
therefore it may only be operated at rest.
Typical areas of application are:
in outpatient and inpatient care (professional healthcare facility environment),
in the homecare area (home healthcare environment), especially for the aspiration of aspirate
from tracheostomy patients.
1.5.2
Essential features
Generation of vacuum (high vacuum)
Generation of flow (high flow)
1.5.3
Applied parts
There are no applied parts, however housing and suction tube are considered as applied parts of
type BF.
1.5.4
Indications
Tracheostomy patients
Aspiration on impaired respiratory function
Aspiration on blood, secretion and food residues from the oral cavity, the pharyngeal zone
and the bronchial system
