40
How do I use the Mercury stand/mount?
The stand/mount lets you place the Mercury on a desk or other flat surface at an appropriate angle. The
stand/mount also provides a way to mount the Mercury onto a wheelchair. The stand opens to a wide range
of angles. Use a viewing position that is comfortable and stable and does not tip forward.
To adjust the angle of the device, place the unit on a table, touchscreen facing up, with
the Mercury foldaway handle farthest from you. Push the aluminum button on
the right side of the stand and swing the Mercury upright into position with
your other hand. Then release the button to keep the unit in place.
Note that the inner black ring moves while you push the button. Do not
squeeze the plastic ring while pushing the button, as the leg will not
operate properly. Use an angle that is slightly less than 90 degrees.
Mounting the unit to a wheelchair
The cutout on the plate accommodates both the
Daedalus quick-release mount and the clip used
with the CJT quick-release mount.
If you ordered a
Profiler
™
mount you will notice a black clip that
connects to the CJT quick-release mount attached to
the holes in the plate.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Depress the aluminum
button to adjust the
angle of the device then
release to lock in place.
Cutout on plate
accommodates
several different
mounts.