Assistant AP-802, Руководство пользователя

Страница: 29 / 36

ENG
р. 4
Y O U R S U C C E S S I S O U R C O N C E R N !
To turn on your tablet, press and hold the [Power] key on the top of your tablet
for a while . You will be guided to Home screen .
Press and drag the slider up to unlock unit.
To turn off your tablet, press and hold the [Power] key until the Device options
dialog appears and tap Power Off , Your device will shut down dialog appears .
Tap OK.
Press [Power] button to enter standby mode, then the device locks automatically .
Locking the device turns off the display to save your battery and to prevent unin-
tended operation of the device . To wake up the device, press [Power] again, then
press the Lock button and drag the slider .
• You need to charge the device prior to use it for the first time or when battery
power is low .
• Charge the device using DC adapter with output 5 V , 2.0A
• Please turn the device to standby mode to shorten the charging process
• Using device for the first three times, charge it for at least 12 h when the power
runs out completely .
• Generall y , it will take about 5 h for full charge in standby mode (display o f f).
• When power cable is connected to the device for charging, the device will enter
into standby mode after remains idle for 60s. P ress the button [Power] to wake up
the device.
• The battery status is displayed at the top of the screen.
When the battery level becomes too low, a prompt comes up to note you charge
the tablet P C. It may take 4-5 hours for full charge .
Note: Sometimes 100% charging may not show up, even the tablet has been charged for a very long time
(more than 5 hours) . The battery is actually full, but the charging info is delayed . I n this case, you may
unplug the power cable .
POWER ON AND OFF THE TABLET PC
CHARGING THE TABLET PC
STANDBY / SLEEP MODE
Full Battery
Charging Battery
Low Battery
ENG