PORTABLE GENERATOR
BASIC INSTRUCTIONS
(Atlas Copco P6500)
GROUNDING THE UNIT
•
Place the unit outdoors, use wire of no less than 2.5mm
2
to connect
the unit and grounding terminal to the ground. One end of the
wire is pressed below the butterfly nut of the unit, screwed up tightly,
and the other end is connected to the metal rod-shaped piece (such as
the iron nail and the opener), and inserted into soil.
FILLING OIL
•
Remove the oil filler cap, fill with the proper type of oil. Use the funnel
for filling. If any spills occur, clean the ground thoroughly to avoid
slipping.
REFUELING
•
Open the fuel tank cap and fill tank with gasoline . The fuel gauge will
display the level of gas in the fuel tank. Caution: the maximum fuel
level must not exceed the inner strainer of the tank when filling.
SHUTTING DOWN THE UNIT
STARTING THE UNIT
1
2
3
4
5
6
7
