5.2. Binding process
HOW TO BIND
Binding is a process make the receiver known which one is his master. After bound, the receiver will
only connect to that RF Module or Transmitter.
5.2.1 Insert the BIND PLUG in receiver’s CH1
～
CH3.
17
5.2.2 Turn on the Transmitter, which has been setting at PPM modulation. The RF Module’s LED red first.
In the mean time, pull the CH2 stick left to right or up to down 2 times. The RF Module’s LED will begin
fast flashing red. This indicates that the Transmitter is waiting for an X8 receiver to bind to.
