ISL-1290-01
Contents Include
Before getting started
Ⓐ
Ⓑ
Ⓒ
Ⓓ
Can you open with your key in both directions? Please go to step
Check Point
Door Preparation
Disassemble Lockset
Ⓒ
Ⓓ
Ⓑ
20mm Hole
.
Fit Yale digital lock using hand Phillips screwdriver to avoid cross threading fixing
screws. If using a cordless, please ensure it is set to low speed & torque.
Are you installing the Yale Smart Latch with a new Nightlatch?
NO, I am going to keep using the existing Nightlatch on my door with the with the Yale Smart Latch.
There are many types of Nightlatches, so please start from installation step BELOW, and follow
the check points for correct installation.
Can you open with your key only in the
left direction? Not in the right direction?
PLEASE GO TO STEP
Your Nightlatch needs an additional plate
Please attach the additional handing plate tightly
onto the cylinder fixing surface.
The plate must be aligned with the shape.
Make sure the '
LEFT TURN'
is shown as the image
below if your latch is opened only to the
LEFT
direction by the key.
Self adhesive pad
Self adhesive pad
Please attach the additional handing plate tightly
onto the cylinder fixing surface.
The plate must be aligned with the shape.
Make sure the
'RIGHT TURN'
is shown as the image
below if your latch is opened only to the
RIGHT
direction by the key.
Please use the key of your existing Nightlatch and check the below
Keep your door open
Insert the key in the outside cylinder key hole
Turn the key 90°clockwise (to the right) and check the latch fully retracts
Turn the key 90° counter clockwise (to the left)
and check the latch fully retracts
Please disassemble your existing Nightlatch
case and mounting plate.
Please read the intructions before fitting and
using the Yale Smart Latch.
The functions and design of this product can be
changed without prior notice for performance
and quality improvements.
*The Nightlatch and plates above are generic
images. If you are retrofitting the Yale Smart
Latch, your existing Nightlatch may be different.
Yes, I have bought the Yale Smart Latch with a new Nightlatch to install them onto my door.
Please start from installation step
ON THE RIGHT PAGE
Front Body
Battery Pack
Handing Plate
Screws
Batteries
Self adhesive
pad
KEY
90
0
20mm Hole
Use template
provided
72.5mm
60mm
32mm Hole
90
0
(L)
Can you open with your key only in the
right direction? Not in the left direction?
At the height you want your lock, use a pencil to mark a spot exactly 60mm from the edge
of the door. At that spot, drill a 32mm diameter hole through the door. Or if using an
existing cylinder hole, use the template to mark the position for the 20mm hole.
PLEASE GO TO STEP
Your Nightlatch needs an additional plate
(R)
The smarter way to protect your home.
Smart Latch
