Assa Abloy Yale Secure Connect MZ-1, Руководство пользователя

Страница: 28 / 36

28
Changing Batteries
.
28
29
Changing Batteries
•
Changing Batteries
•
PIR Video Camer Battery Change
2. Unscrew
& remove
top case
3. Remove &
replace Batteries
4.
1. Disarm
Door/Window Contact Battery Change
When the battery is low the LED will light up when the door/window is opened.
Note: Door/Window Contact case tamper conditions are also indicated by a lit LED, check the tamper before
changing the battery.
To change the battery:
1. Disarm 2. Unscrew 5. Insert new
battery 6. 3. Remove cap
top case. 4. Remove battery
Please ensure battery
is inserted correctly.
Key Pad Battery Change
When the battery is low the LED will flash when any key is pressed. The battery is changed as follows:
Press a number key and check that the LED lights.
If the LED lights the new battery installation is successful.
2.
Unscrew &
remove cover
3. Remove old
battery
4. Insert new
battery (slot under
2 tabs) & click in
place.
5. Replace cover.
1.
Disarm
2.
Unscrew &
remove
3.
Remove
& replace
battery
4.
Replace cover
1.
Disarm
Press any key and check that the LED lights. If the LED lights the new battery installation is successful.
Key Fob Battery Change
When the battery is low the LED will glow dimly when any key is pressed. The battery is changed as follows:
PIR Camera Battery Change
2.
Unscrew
& remove
top case
Alkaline
1. Disarm
3. Remove old & insert
new Batteries
4.
Please be careful
when removing case
as cable is very
delicate.
Alkaline
EF-PIR
1. Disarm
2.
Unscrew
& remove
top case
3.
Remove
Batteries
3. Insert
new
Batteries
4.
PIR Battery Change
When the battery is low the LED will flash when any motion is detected. The batteries are changed as
follows:
Ensure tamper spring is fully
depressed when re-fitting the PIR to
the back case. If this has not been
done correctly this will be indicated
by a flashing LED on the PIR.