Assa Abloy Yale Real Living B1L Z-Wave, Инструкции по установке и программированию

Страница: 15 / 20

15
P/N AYRD-110-INST-FUL Rev G
Resetting Lock to Factory Default
When lock is reset to factory defaults all user
codes (including the Master PIN code*) are
deleted and all programming features are reset to
original default settings (see "Factory Default
Settings").
1. Remove the battery cover.
2. Remove the batteries.
3. While pressing the reset button (minimum of 3
seconds) reinstall batteries. Release reset
button.
4. Replace battery cover.
Upon reset, Master Code creation is the only
option available and must be performed prior to
any other programming of the lock.
NOTE: After setting the Master Code, press any
key to complete handing of the lock.
Enrolling Lock In Network
®
Your network controller first needs to be in
enrollment or exclusion mode for the lock to be
enrolled or removed from network.
2. Press button and hold until unit beeps two (2)
times.
Once you put the controller in the enrollment or
exclusion mode, the lock can be enrolled or
®
removed in the Z-Wave network two ways -
through the keypad using the #7 key (see
Programming Through Menu Mode) or by
pressing the button.
1. Remove the battery cover.
To remove lock using the button option:
To enroll lock using the button option:
1. Remove the battery cover.
2. Press button and hold until unit beeps five (5)
times.
4. Replace battery cover.
3. Release button and network joining
automatically begins.
3. Release button and network removal
automatically begins.
4. Replace battery cover.