22
Extra Features
Press and hold the passage
mode button (above batteries)
for 5 seconds.
Step
Icon
Description
Open the battery cover then press and hold the passage mode
button for 5 seconds to activate the child safety mode.
Replace the battery cover.
Press any button
Enter PIN code
Press and hold the
for 5 Sec.
Step
Icon
HOLD
Description
Press the [#] button for 5 seconds.
(The beeping sound sets off for 3 times.)
Press any button.
Enter the registered PIN code in the keypad.
Child Safety Mode
Handle Alarm
With child safety mode activated, depressing inside handle will sound the alarm for 10 seconds to notify the door is open to any persons inside. Inputting
your pin or pressing the key fob will cancel the alarm. If required the mode will then need to be activated.
Note
When the handle alarm is set, any operation of the handle from inside will sound the alarm for 3 minutes.
Inputting in your PIN or by pressing your key fob will disable the handle alarm setting.
HOLD
Press the passage mode button
Step
Icon
Description
Open the battery cover and press the P button. You will hear the lock unlock.
NOTE: The lock will remain insecure until passage mode has been stopped.
To stop passage mode press the passage mode button or lift the handle.
Passage Mode
When passage mode is active, the outside handle will not relock allowing you to enter without entering the code.
Keyfree manual 2014-2_
.qxd 08/12/2015 10:18 am Page 22
