An ASSA ABLOY Group brand
80-9086-0054-010 (07-14)
Step 3
. Remove Inner Shell from Outer
Shell by gently pressing the
Inner Shell upwards from the
bottom.
Use caution not to
damage sensor wires.
2
Step 1.
Remove Cylinder Monitor
Assembly from Lockbody by
gently pushing up through the
opposite side of cylinder hole.
Step 2.
Remove spring from assembly
.
Use caution not to stretch or
otherwise deform the spring.
Step
4
.
Turn Inner Shell on side. Align
the inner shell with the diagonal
slot in the Outer Shell. Slide the
Inner Shell through the Outer
Shell.
Spring
Reed Switch
Inner Shell
Outer Shell
Inner Shell goes
through here.
