2
8
Product Support Tel 800.438.1951 • www.yalelocks.com
Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their
respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication.
Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.
Copyright © 1989, 2012, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.
Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Yale Locks & Hardware makes no representations or warranties
concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening,
please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
To Change Lock Hand or Remove Cylinder for Rekeying
All 5300 Series Locksets
Except Locks described below.
Outside knob must be in unlocked position.
Insert key halfway into cylinder. Rotate knob
counter-clockwise until knob retainer lines up
with hole in trim cap. Depress retainer with a
nail or pointed tool and slide knob off. Turn
knob and cylinder 180°. Reinstall using key to
align cylinder in lock.
Do not insert key more
than halfway when reinstalling knob.
Push
knob in until retainer snaps into place.
5305 Lockset
Outside knob must be in unlocked position.
With inside knob removed, turn button to
unlock outside knob. Insert key halfway into
cylinder. Rotate knob counter-clockwise until
knob retainer lines up with hole in trim cap.
Depress retainer with a nail or pointed tool and
slide knob off. Turn knob and cylinder 180°.
Reinstall using key to align cylinder in lock.
Do
not insert key more than halfway when
reinstalling knob.
Push knob in until retainer
snaps into place.
5316 Lockset
(Outside knob only) Insert key and rotate to the
unlocked position. Turn knob counter-clockwise
until knob retainer lines up with hole in trim cap.
Depress retainer with a nail or pointed tool.
(Caution: At this point slide knob out not more
than 1/8", rotate key counter-clockwise and
withdraw halfway out of cylinder.) Slide knob
off. Turn knob and cylinder 180°. Reinstall using
key to align cylinder in lock.
Do not insert key
more than halfway when reinstalling knob.
Push knob in until retainer snaps into place.
5320 Lockset
Insert key into cylinder and rotate 90°
clockwise. Depress retainer with a nail or
pointed tool and slide knob off. Turn knob and
cylinder 180°. To reinstall knob you must use
key to align cylinder in spindle, then rotate 90°
clockwise and push knob in until retainer snaps
into place.
An ASSA ABLOY Group brand
80-9150-0033-010 (08-12)
