9
ASSA ABLOY Hospitality
66 1100 005-11
1. Introduction
Allure
is a locking and room status system with modular architecture. Several configurations
are possible, and Figure 1 shows all possible connections to the
main control unit
;
an in-wall
mounted junction box which also contains
an RFID
lock controller unit
, LCU 6333/LCU 6334.
describes mounting and connection of the different Allure parts, while
give other information about the different parts.
maintenance while the
gives a quick reference of technical data for the different
Allure parts and also for the room bus cable etc.
Note:
The Allure product range also includes
the below items
a power supply with an input of
100-240V~50/60 Hz 0,5A
and an output of
12 VDC, 1A
(electric strikes may however need a separate power supply suitable for the
power consumption of the strike)
a doorbell which is constructed to work on
12VDC, 1A
to utilize the same power
Note:
Some of the parts in Figure 1 are for future use; ask Product Marketing for details.
Figure 1
1)
'EMS' are three transistor outputs which give a signal based on what card that is presented
at the LCU (EMS 1 is triggered at 'guest first entry'; EMS 2 is triggered at 'guest normal entry';
EMS 3 is triggered at 'staff entry')
2)
The
room bus cable
is a cable inside the rooms to which wired room panels, GPIO modules and future
modules can be connected. There is no limitation in the number of items that can be connected to the
room bus cable.
Attention:
Observe precautions for handling;
electrostatic sensitive devices.
