21
ASSA ABLOY Hospitality
66 1100 005-11
Figure 29
6. Let the locking mechanism of the back frame
be open (see marks in Figures 29 and 30) and
snap the access panel onto the back frame.
Figure 30
Figure 31
7. Push down the locking mechanism to close it.
Note:
To access the service connector, backup batteries and reset switch, the front
part of the access panel must be removed again from the back frame; this is done
by pulling the locking mechanism up. Make sure that the locking mechanism is
placed in a discrete way, invisible for hotel guests.
2.4 To install a wired room panel
The
wired room panel
(in-room panel)
is an optional part of the Allure system, and
can be used in the Allure system configurations having DND/MUR (
do not disturb/
make up room
) functionality. The functionality of the panel is to let users set status
of the room, which is then reflected on the corridor panel, and as a message in the
central system if the Allure solution is part of an online system. A series of wired
room panels can be installed in a chain, to go with one corridor panel/one room.
Figure 32
Figure 33
Note:
If DND is activated, the doorbell button on the corresponding access panel
will be deactivated and staff cards will not work at the access panel.
