background image

Product Features:

 

 

 

.

User Addition:

1.

 

Reset factory default:

 Press RESET at  back  of  lock  for 5  seconds, voice will  

 

prompt reset succeed.

2.

 

Register master/user:

2.1  Initial mode:

 Touch screen key pad for lights on and press # for 

 

2 seconds and voice prompts addtions of master code.

2.2  Once master user is added:

a. Add new master: Touch screen for lights on and press # 

 

for 2 seconds, voice    prompts    confirm master, input    any   registered master  

 

and press # again to add master user (fingerprint /password)

b.  Add new common user: Touch screen for lights on and press # for 

  2 seconds input any registered master user “and” voice prompts 

 

 

“add user” to add new fingerprint, password and card etc. 

3.

   Addition  of “One Time  password or  Guest  password”: Users  can  be 

      added for  with  password  access which will provided access one time 

      and will expire after its used. 

1.  When Deleting fingerprint, one master user in fingerprint has to be left.

2.  When keypad light is off use “0” as door bell. 

Important Instructions:

1. After installation of lock please reset lock to factory default mode. 

2. After factory default mode make sure to register 1 master user.

3. 

The  handle is the  key  part for  opening  and closing door, and  its flexibility ratio  

    directly  influences  the usage of door lock, hence, don't   hang articles on handle.

 

4. 

Gently press   fingerprint  on  the  fingerprint sensor  for registration of fingerprint. 

    Please don't press with great  force to prevent   scratching the  fingerprint sensor.  

5. 

This lock uses 4 AA high-energy  alkaline  batteries (1.5V). When  it prompts "the

    voltage is low, please replace  battery" for  the first time, the  door can be opened 

    for about 100 times  as per  different  battery  capacities; At  this  time, the battery 

    should   be  replaced   promptly  to  avoid  inconvenience  due  to  the  exhausted 

    battery. 

  

4

5

1.

 

All fingerprint need to scan 3 times for addition.

2.

 

Password is of 8 digit and has to be entered 2 times for addition.

3. Card is  registered  after voice  prompts "add user"  &  scan  card near RFID 

    scanner for confirmation. 

4. After successful registration press * to exit.

3.

 

Delete registered fingerprint/card/password:

3.1. Deleting individual fingerprint:

 Touch screen for lights on &  long    press 1 for 

       2 seconds. After voice prompts input fingerprint to delete,    press   fingerprint on 

       scanner to delete.

3.2. Deleting by user numbers:

 Touch  screen    for   lights  on  &   long  press 1 for  

 

2  seconds. After  voice  prompts  input  fingerprint  code  to  delete  enter    user  

       number of fingerprint to delete.

3.3. Delete all cards:

 Touch   screen  for  lights on   & long   press 2   for  2 seconds 

 

press # to enter in to delete all cards option and # again to confirm deletion.   

3.4. Delete corresponding password:

 Touch   screen   for lights on & long press  4  

       for 2 seconds at this time input password code and press # to confirm.

3.5. Delete all password:

 Touch screen for lights on & long press 4 for 

 

2 seconds press # to delete all passwords.   

● Multiple  way  to  access: Fingerprint, Pin Code,  RFID Card, &  Mechanical Key. 

● Fingerprint:  Advanced  semiconductor  sensors  with  360° scanner.

● Pin code Elegant  keypad with code scrambling feature. Before correct password 

   can input 12 digital which can avoid password peeping.

● Dual    authentication   mode:  Fingerprint   mode     ( master  +  common  user ), 

   fingerprint   + pin code,   finge RFID card  mode, After  this  setting   dual  

   authentication will be required to access the lock at same time to open the 

   door, suitable for special occasions.

● Lock can  have  multiple  access  users capacity: Fingerprint  ( 5 Master Users & 

   85 Normal Users ), Pin-code ( 5 Master Users & 15 Normal Users ),  RFID cards 

   (99 Normal Users) 

● Alarm: Tamper, low battery alarm and password protection.

● External power supply: Can use power bank with 5V for emergency power supply. 

4. Put lock body  guide post   on the   inside  panel and   make  sure   inside   handle, spindle,  

screws and stud are at right position.

Lastly, outside   and   inside   panel   should   be  connected with spindle at right position, if 

required adjust accordingly & tighten screw.

Install   battery   cover,   try   opening   by  fingerprint, RFID card or pin code or manual key.

5.

6.

Отзывы: