background image

DoorSense User Guide

3

What is DoorSense?

DoorSense is a standalone, battery-powered 

unit which can be fixed to a door in seconds 

to provide a reliable way to keep it open, 

and automatically release it if the fire alarm 

sounds. DoorSense is designed to react to a 

continuous sound of over 65dB when heard 

for at least 15 seconds.

DoorSense is incredibly easy to install, 

needing no wiring or specialist skills - just 

What’s included with DoorSense

3 colour 

warning light

Introduction

DoorSense is a battery operated device designed to hold open a fire door safely and legally.

DoorSense will automatically release upon “hearing” the fire alarm. DoorSense can be used 

to hold the fire door in any position between open or closed.

It is recommended that a fire door is held open at an angle of more than 65 degrees*. 

*Minimum 65 

Sound sensor

Foot pedal

Stopper

Batteries

Identification 

number

Fixing hole

Tools needed to install

  

Screwdriver

  

Pen/pencil

  

6mm drill bit

(To suit floor type)

  

1.5mm drill bit

    (To suit door type)

use the fixing template provided. DoorSense 

can even be retrofitted to doors using older 

door release mechanisms.

Once installed you can activate DoorSense

working manually, using either the foot release 

or gently pushing the door open wider or 

automatically using the pre-set timer release.

3 colour 

warning light

Introduction

DoorSense is a battery operated device designed to hold open a fire door safely and legally.

DoorSense will automatically release upon “hearing” the fire alarm. DoorSense can be used 

to hold the fire door in any position between open or closed.

It is recommended that a fire door is held open at an angle of more than 65 degrees*. 

*Minimum 65 

Sound sensor

Foot pedal

Stopper

Batteries

Identification 

number

Fixing hole

Tools needed to install

  

Screwdriver

  

Pen/pencil

  

6mm drill bit

(To suit floor type)

  

1.5mm drill bit

    (To suit door type)

Tools needed to install

Floorplate

without stop

Floorplate

with stop

Adjuster tool

Unit screw pack

4 x silver screws

Floor plate screw pack

4 x black screws

4 x plugs for concrete floors

2 x C-Type batteries

Содержание UNION DoorSense 8755A





















Отзывы: