Assa Abloy SL300, Руководство пользователя

Страница: 18 / 22

Safety accessories
• Combined motion and presence sensors
• Separate presence sensors (presence in the door opening or side presence for the trailing edge
of the door)
General accessories
Cover
Made in clear anodized aluminium .
Electrical locks
The following locks are available to the operator:
• Locked with power (LDP), fail safe
Electrical opening with the battery unit
Used if a door is required to be opened by means of a rechargeable battery unit and remain in this
position in the event of power failure. The battery can be monitored.
Troubleshooting
Remedies What´s wrong?
The door does not open
Change the setting of the mode selector. The motor does not start
Check the mains power and fuse in the building.
Unlock the mechanical locks. The motor starts but stops during
opening
Clean the floor guide.
Check for objects jammed under the door.
The door does not close
Change the setting of the mode selector. The motor does not start
If a presence sensor is installed, check for and remove objects placed in the
presence zone.
Clean the floor guide. The motor starts but stops during
opening
Check for objects jammed under the door.
The door moves slowly
Prevent traffic from using the door and allow it to close completely.
Reset the operator by briefly pushing the reset button (see page 10 ).
If the problem continues, please contact your ASSA ABLOY Entrance Systems representative.
1020882-en-5.0 Issue 2022-03-16 18