background image

Installation Instructions

1-800-727-5477 • www.sargentlock.com

A6286M  4/20

Copyright © 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in 
part without the express written permission of SARGENT Manufacturing Company is prohibited.

 WARNING

This product can expose you to lead which 
is known to the state of California to cause 
cancer and birth defects or other reproductive 
harm. For more information go to www.
P65warnings.ca.gov.

6-Line

Bored Lock

Attention Installer:

Please read 

these intructions carefully to prevent missing important steps

.

Note:

Improper installation may result in damage to lock and void factory warranty

Содержание Sargent 6-Line

Страница 1: ...Manufacturing Company is prohibited WARNING This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm For more information go to www P65warnings ca gov 6 Line Bored Lock Attention Installer Please read these intructions carefully to prevent missing important steps Note Improper installation may result in damage to loc...

Страница 2: ...a Install Latch Unit 2 b Remove Inside Knob or Handle 3 c Adjust for Door Thickness 3 d Install Lock Unit 3 e Attach Inside Rose 3 f Replace Inside Knob or Handle 3 2 Reassembly 4 1 Installation a Install Latch Unit Prepare door and jamb according to template provided Mount latch unit in door Remove Inside Knob or Handle b If received with knob or handle engaged depress knob catch with screw drive...

Страница 3: ...l interfere Depress latch bolt slightly to allow retractor to engage latch tailpiece Attach Inside Rose e Snap on roses Slip on retainer plate and fasten with two machine screws Position spring clip notch and snap rose over retainer plate Threaded type roses Slip rose over spindle and screw down firmly using trim wrench provided Replace Inside Knob or Handle f Line up slot in shank with knob catch...

Страница 4: ...r press a small nail into the outside knob sleeve hole Turn key in clockwise direction approx 45º or until depression of the knob catch is felt with nail Checking alignment of cylinder head with hole in knob push knob until knob catch clicks into position Pull collar back into proper posi tion against knob Note For 37 38 2 functions check to determine that the slotted member which engages the cyli...

Отзывы: