12/15/10
1-800-810-WIRE • www.sargentlock.com • A8032D 3
Copyright © 2010, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
Passport 1000 Series P1 PoE Mortise Lock
Installation Wiring
Overview
5
General Description
2
Hardware Specifications
3
•
Inside lever retracts latch
•
Locks furnished for 1-3/4” doors only
•
Grade 1; UL Listed
• Outside lever controlled by any combination of
keypad, magnetic keypad, iCLASS, prox (prox-
imity) reader, or mechanical cylinder
•
Complete locksets with on-board memory
•
Magnetic swipe standard with optional 125 kHz
Proximity Reader (specify PRX-), 13.56 MHz
reader (specify IKM-), and/or keypad (specify KP-)
•
ADA Compliant
•
Easily retrofits existing Passport 1000 door preps
(cylindrical locks)
•
Latch 1/2” standard
3/4” throw fire-rated double doors
(optional) (41- prefix)
•
Guarded latch
•
Outside lever is unlocked through access
control credentials only
Electronic Specifications
4
•
2,400 users per lock; 10,000 event audit trail
•
Multiple time zone and holiday access scheduling
•
Centralized lock management
•
Real time door status monitoring
•
First-In unlock configuration, either by time or by
user (selectable)
•
Lock down capable
•
Input Power: PoE Class 2 Device, as defined
by IEEE 802.3af, requires up to 7 watts
over structured cabling
•
Uses existing Magstripe keycards (track 2)
•
Magnetic Stripe Card Coercivity: HiCo (4000 Oersted) or
LoCo (300 Oersted)
• Supports HID 125 kHz prox or 13.56 MHz iCLASS
credentials (26 - 39 bit); supports CSN reads for other
common 13.56 MHz cards, including MiFare, DesFire, and
Felica
The SARGENT Passport Series v.P1 cylindrical lock is available with either an HID
®
Prox 125 kHz or 13.56 MHz
iCLASS
®
technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet) providing
access control with Magnetic swipe and optional Proximity Reader and/or Keypad, as well as detailed audit capabilities-
technology as a proven alternative to traditional access control installations. The v.P1 is a self-contained microproces-
sor-controlled access control product with non-volatile memory. It uses the existing network cable to communicate with
access control systems. The v.P1 lock holds a total of 2400 different user codes.
Using PoE technology coupled with third party software, this v.P1 online lock offers a complete, integrated
access control system.
The Passport Series v.P1 cylindrical lock may be used for both indoor and outdoor applications. A weather-
protective gasket is recommended for outdoor applications.
HID and iCLASS are registered trademarks of HID Global Corporation.
* Lockdown and real-time door
status monitoring available
only when lock is hard-powered
SARGENT Passport Series PoE
v.P1 Typical Application
LMT: Lock Management Tool
A. PoE frame harness assembly
B. PoE data hinge from McKinney
(patent pending)
C. PoE door harness* from McKinney
D. DPS: Door Position Switch
(Cylindrical and Exits only)
E. Passport Series v.P1 PoE Lock
* Door width determines length
Network Cable
Network Switch (802.3af)
Surface Mount RJ45
A
B
C
D
E
Supplied by Others
PRELIMINARY
