Copyright © 2016 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9316-2533-020 Rev 1
ASSA ABLOY
Installation Instructions
An incorrectly installed or improperly
adjusted door closer can cause
property damage or personal injury.
These instructions should be followed
to avoid the possibility of
misapplication or misadjustment.
CAUTION
CAUTION
Components:
®
UniTrol Door Controls
UNI-1600BC Series
Sized Closers
UNI-1601 Series
Multi-Sized Closers
Power Adjustment Screw
(1/8 Hex Drive)
1601 Only
"BC" Valve
Pinion Cap
Closer
Size
Stamp
"L"Valve
"S"Valve
4
Soffit Plate
NOTE:
For special applications a separate door and frame preparation template is packed with these instructions
Use this instruction sheet for installation sequence and closer adjustments only
• It is recommended that the door on which the door closer will be installed be hung on ball bearing hinges. Door must swing freely
• Door and Frame must be properly reinforced, or use of special fasteners employed, to prevent the mounting screws from pulling out.
• All dimensions are given in inches with corresponding metric dimensions (mm) in parenthesis.
Standard Frame
Installation
1-7/8 to 4-5/8
Frame Reveals
(Uses 6190 Bracket).
Bracket illustration page 4.
See Page 2
Deep Frame
Installation
Frame Reveals Over 4-5/8
(Uses 6191 Clamp Kit).
Bracket illustration page 4.
See Page 3
Flush Transom
Installation
Flush Partitions
(Uses 2022 Bracket).
Bracket illustration page 4.
See Page 4
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Hinge Edge of Door
Hinge Edge of Door
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Arm Identification
Arm Stamping
Door Width
Main Arm
Non Hold Open
Hold Open
28” - 32”
(0.70 - 0.80m)
33” - 41”
(0.85 - 1.00m)
42” - 48”
(1.05 - 1.20m)
9-1/2”
(241mm)
11”
(279mm)
12-1/2”
(318mm)
6100-11
6100-13
6100-14
6100-1
6100-3
6100-4
Main Arm
Hold-Open Option
UniTrol Parallel
Arm Assembly
Optional
Cover
1600P
Hinge Edge of Door
Hinge Edge of Door
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Non Hold Open (UL Listed)
Hold Open (H) (Not UL Listed)
Sized
(Sizes 3, 4)
UNI-1603BC(H)
UNI-1604BC(H)
Multi-Sized
(Sizes 1 thru 6)
UNI-1601(H)
Models:
ASSA ABLOY
