Assa Abloy ML20900 Series Скачать руководство пользователя страница 1

Copyright © 2014 Corbin Russwin, Inc. All rights reserved.

Reproduction in whole or in part without the express written 

 

permission of Corbin Russwin, Inc. is prohibited.

®

ASSA ABLOY

ML20900 ECL Series Mortise Lock

1

For Technical Assistance call Corbin Russwin at 1-800-810-WIRE (9473)

FM357 10/18

Attention Installer

Please read these instructions carefully to prevent missing important steps.

Please Note: Improper installations may result in damage to the lock and void the factory warranty.

Important: The accuracy of the door preparation is critical for proper functioning and security of this lock.

                  Misalignment can cause premature wear and a lessening of security.

Installation Instructions
ML20900 Series
Electrified Mortise Lockset

®

ASS

A A

BLO

Y

In U.S.:
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
www.corbinrusswin.com

In Canada:
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, Canada L4K4T9
www.assaabloy.ca

 WARNING

This product can expose  

you to lead which is  

known to the state of  

California to cause cancer 

and birth defects or other 

reproductive harm. For 

more information go to  

www.P65warnings.ca.gov.

08/2018

Содержание ML20900 Series

















Отзывы: