Assa Abloy LCU9101, Руководство пользователя

Страница: 21 / 28

LCU9101
21
You select one of the menu options by entering the digit that
correspond to your choice and pressing [Enter].
The different options in the configuration guide are:
Menu options
1. Show current configuration and status
2. Run the setup wizard – Whit this option you make the actual
configuration of the control unit. After selecting this option you
get the possibility to select type of configuration, either
“Automatic with DHCP” or “Manual”.
Tip! At a manual configuration, have this information at hand:
– IP address of the control unit
– netmask of the control unit
– The IP address to the default gateway
– IP address of the DNS address
– IP address or name of the ARX server
3. Test the communications with the ARX server – Tests the
communication between the control unit and the ARX server.
4. Trace the network route to the ARX server – With this option
you can trace the route the information from the control unit
takes through the network to the ARX server.
5. Reboot – Restarts the control unit
6. Master reset –
Note! This option is not in use.
0. Quit – This last option terminates the configuration guide.