An ASSA ABLOY Group company
Raising the Standards
21
What are the faceplate dimensions?
502 faceplate option
[mm]
Inches
22
Installer Hint
Cutting an aluminum frame with a router or a jigsaw can be very messy
and noisy. Spread out a drop cloth in front of your work area to capture the
aluminum chips and bring a vacuum to clean up after your installation.
What should the cutout be?
Cut frame according to the dimensions in the drawing.
a
Install the mounting tabs to the frame, but do not fully tighten mounting
tab screws.*
b
After you install the strike, securely tighten the mounting tab screws.
c
a
b
c
503 faceplate option
*Note: To make it easier to mark the
locations for the mounting tabs, attach
the mounting tabs to the faceplate, turn
the faceplate backwards and insert it into
the cutout. Mark the hole locations using
the template. Remove the assembly and
drill holes.
[mm]
Inches
