SD-04 Rev. A
SECTION 10 - CHANGING THE DOOR UNLOCK TIME
Your Digital Keypad comes from the factory with a door unlock time of 5 seconds.
This can be simply altered by the following sequence. Put your Digital Keypad into
the Programming mode by either pushing the PRGM CODE push button on the CPU
(see figure 2) or by entering your Program Code (See section on Program Code if
you do not have one loaded in your Digital Keypad) on the keypad. Once the
Yellow LED begins to flash tap in code 9 followed immediately by the number of
seconds you would like the door to unlock. For example if you want a 9 second
unlock time then tap in code 909. For 15 seconds you would tap in 915. Wait a
few seconds and the Red LED (Green if you are using Reverse Light Logic) will flash
twice indicating that you have successfully changed your unlock time. The Yellow
LED will resume flashing. Simply press the Bell Key (or * or # on the DK-16) to
end the programming mode. Enter one of your User Codes or the Hard Code to
verify that the door unlocks for the desired period of time.
SECTION 11 - HOW TO REVERSE THE LED DISPLAY LOGIC
From the factory your Digital Keypad is designed to display a Red LED for the entire
duration of the door unlock time. Occasionally we hear from the customer that
they would prefer the Green LED to be on while the door is unlocked. This function
can be achieved as follows. Put your Digital Keypad into the Programming mode by
either pushing the PRGM CODE push button on the CPU (see figure 2) or by
entering your Program Code (See section on Program Code if you do not have one
loaded in your Digital Keypad) on the keypad. Once the Yellow LED begins to flash,
tap in code 73. Wait a few seconds for the Green LED to flash twice. The Yellow
LED will resume flashing. Simply press the Bell Key (or * or # on the DK-16) to
end the programming mode. Enter one of your User Codes or the Hard Code to
verify that when the door unlocks you get the Green LED.
If you wish to return the LED logic to the factory default, enter programming mode
(see above) and tap in code 74. Wait a few seconds for the Red LED to flash twice.
The Yellow LED will resume flashing. Simply press the Bell Key (or * or # on the
DK-16) to end the programming mode. Enter one of your User Codes or the Hard
Code to verify that when the door unlocks you get the Red LED.
SECTION 12 - HOW TO ALTER THE SOUNDER FUNCTION
TO SILENCE THE SOUNDER - When your Digital Keypad shipped from the factory its
sounder was set up to echo each keystroke. In other words each time you depress
a key you get a tone to verify acceptance of that keystroke. On occasion a
customer will prefer to silence this function when the keypad it located near
Released: 8/27/2009
Securitron Magnalock Corp.