Assa Abloy Corbin Russwin IN220 PoE, Руководство по установке

Страница: 12 / 24

12
IN220 Cylindrical Lock
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Install latch bolt with beveled bolt facing the strike
using two #8 x 3/4” combination screws (Fig. 4):
Optional Strike Box
Fig. 5
4. Install Latch Bolt
a. Insert DPS into the raceway on the latch edge of the door.
b. Push wires through raceway toward lock prep.
c. Push DPS firmly into place by hand.
Note:
DO NOT TAP SWITCH WITH ANY TOOL.
d. Install magnet into door frame. Push firmly into place by hand.
See instruction
A7983 .
3. Install Door Position Switch (DPS)
CAUTION: if DPS is not installed or is installed
improperly, door status monitoring features will
not function.
5) Installation Instructions (Continued)
Fig. 4
Install Strike Plate using two #12 x 1” combination
screws (Fig. 5):
5. Install Strike Plate
Fig. 3
PoE
Harness
(cat5e and
ground)