15
Access 600 M802
Installation Instructions
FE6600/BL6600/MP6600 Series Multi-point Lock
FM452 07/20
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
7
Installation Instructions, continued
i
Outside Lever and Inside Adapter Plate Assembly Installation
1. With outside lever horizontal, insert the
mounting post through outside of door and
lock body.
2. Confirm the lever spindle is properly
engaged inside the lock body (Figure 3).
3. On the inside of the door, insert slotted
spindle into square hole of mortise lock
(Figure 4), with spindle slot directed away
from the lock body, and aligned with the set
screw hole in the inside adapter.
4. Slide inside adapter and plate assembly over
spindle and loosely secure with (2) #8-32
X 5/8” Phillips oval head and lock washer
machine screws.
NOTE:
Ensure that position of set screw hole and
spindle slot are oriented to match location
of hole in the inside lever handle.
5. Securely tighten the lock body screws.
Outside of
Door
(2) #8-32 X 5/8” Phillips Oval
Head and Lock Washer Machine Screws
Mortise Lock body Screws
Inside of Door
Slotted Spindle
Figure 3
Figure 4
