Logistic Security Solutions
pg. 7
Biometric Wristband – User Manual – BWB01
Figure 3: Wristband with pins for charging (left) and with charging clip attached (right)
The battery will support the Wristband up to 168 hours (one week) in standby mode, and more than
30 lock openings during a 12-hour period.
The Wristband must be charged using the supplied
charger. The charging time is typically less than 60
minutes. Note that the battery should not be charged in
higher temperature than 60 degrees C.
A fully charged Wristband is indicated by a green LED light.
When charging, the Wristband’s LED shows a blinking
turquoise light.
6
Care
6.1
Replacing a wristband
The wristband has two separate straps (top and bottom) that you can swap with accessory bands
sold separately.
1.
Turn over your Wristband and find the strap screws—there’s one on each end where the
strap meets the frame.
2.
Use a screw driver to remove each strap
