Fitting instructions
Bolt
ASSA
560/13 and
ASSA
575.
ASSA
560/13 and
ASSA
575 can be used for both right and left hung doors.
This is determined by how the stop link ”A” is positioned. The
stop link is placed across the linkage arms, inserting it’s pins
into back plate.
Fitting instructions
1. Mark the center height for the lock housing = handle
5mm.
2. Use nails to the back plate through the holes ”B”.
3. If handle 2858 is to be used, this to the lock housing using
the screws and locking plate supplied.
4. Insert the bolt rods through the rod guides.
5. Connect the rods to the linkage arms.
6. Fixing of push button cylinder 2940 (if used). Remove the
label, covering the screw holes. Turn the handle, allowing the
screw holes to be visible from the inside. the cylinder with the
4 screws supplied. Turn the handle and ensure proper locking
operation.
7. Fix the lock housing to the back plate, ensure that the
housing fits correctly into the back plate.
8. Move the handle into open position (bolt rods retracted)
and the rod guides as close to the outer ends possible.
9. Before ing handle 1710 (Bolt 575), cut the square spindle
to correct length = door thi30mm.
Bolt 560/13 can also be used as an evacuation bolt. The lock
housing should then be mounted with the handle pointing at
the top in locked position. The stop link is not to be used. Do
not use cylinder 2940 either.
560/13
560/13
B
B
A
B
B
A
1710
Handle
2858
Handle
ASSA OEM AB
Box 121 99
402 42 Göteborg
+46 (0)31-704 40 00
www.assaoem.se
OEM9011.1112.112 /
K
T 629
