Assa Abloy Albany RR1000, Руководство пользователя

Страница: 7 / 40

Albany RR1000 Owner’s Manual
6410T0030_EN01 2014-08-01 Page 4
 During operation of the door, do not stick your hands in the side frames. Keep
hands and feet clear of the door at all times. Stay clear of the door while it is
operating.
 Never reach into the area of the top roll when the door may be energized.
 Do not operate the door when excessive wind load is present. Refer to applica-
ble specifications for “operational wind load”.
 Only operate the door at the approved supply voltage and mains frequency.
 Only use accessories or attachments that have been approved by the manu-
facturer for use with this door.
 The STOP Button on the front of the panel is a momentary stop ONLY with the
ACS-50 and MCC control panels. The door will only stop for that cycle; motion
detectors, floor loops, or any activating device can activate the door! To en-
sure that the door keeps from being activated, use the rotary disconnect on
the front of the panel.
 When damage occurs to the door (mechanically or electrically) turn off opera-
tional power immediately. This is especially true if you have damage of the
curtain or drive system.
 For all kind of work on the door the main switch (main disconnect) must be set
to the OFF position and secured from being re-energized by unauthorized per-
sons by following proper lock-out tag-out procedures.
 Do not ever use petroleum-based products on the door curtain. If done, this
voids all warranty on the curtain material.