Assa Abloy 1380, Инструкция по установке и монтажу

Страница: 25 / 40

Introduction
1 Introduction
1.1 U s e
Flush-mounted escape door terminals 1380XX are designed to be connected to escape door control units 720-
15, 1370-20/-21 and 720-30/-32. They will be installed next to escape doors and fit into flush-mounted and wall
cavity switch boxes with a minimum mounting depth of 60 mm. Covers can be used from many standard switch
ranges by established switch manufacturers.
The emergency button 1380E10 serves to release the locking element in the escape door system.
The key switches 1380E01/E04 are used to control the escape door system.
The key switches 1380E03/E06 are used to control and to indicate the escape door system operating status.
1.2 Scope of supply
The scope of supply depends on the individual system design.
Flush-mounted or wall cavity switch boxes are not included in the supplied package.
Flush-mounted escape door terminal set 1380-1X
Set 1380-1X consists of:
Q
Key switch 1380E0X
Emergency button 1380E10
Q
Cover frame, depending on switch range
D00428
02
Page 25