Assa Abloy 1048.10, Монтаж и установка

Страница: 13 / 16

13
Mounting instructions:
Locking element and rosette must be aligned as shown in illustration 4 (flush).
When closing the door or drawer, the locking bolt of the rosette must be able
to engage the locking
element unimpededly and completely. Furthermore, no
tensile force caused by the door respectively the drawer must act on the lock-
ing element. The rosette can be fixed by screws and is also suitable for flush
mounting. The adjustment of locking element and rosette must be effected by
means of the elongated holes in the locking element. An adhesive film (adhe-
sive on both sides) is supplied which can be stuck to the back of the rosette.
This will help you to find the correct rosette position.
Before continuing, it is recommended to make sure that the locking element
is connected and can be unlocked electrically.
After fixing the adhesive film, the rosette must be put into the mounted locking
element in the position “mounting” and the door must be closed. When the
door is opened again the rosette sticks in the correct position. After marking
the drilling points, the rosette must turned through 180° into the position “op-
eration”.
Under no circumstances must the rosette be mounted as shown in illustra-
tion 5, i. e. turned trough 90°. If the locking bolt of the rosette engaged the
locking element that way, it would not be possible to open the door or
drawer any more.
Correct positioning: The locking bolt of the rosette engages the locking ele-
ment unimpededly and completely.
Wrong positioning: The rosette - turned through 90°.
!
!
Illustration 4: Mounting instruction
Illustration 5: Mounting instruction