background image

2

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or 

translated in any language, in any form or by any means, except duplication of 

documentation by the purchaser for backup purpose, without written consent of 

ASRockInd Inc.
Products and corporate names appearing in this documentation may or may not 

be registered trademarks or copyrights of their respective companies, and are used 

only for identification or explanation and to the owners’ benefit, without intent to 
infringe.

 

Disclaimer:

Specifications and information contained in this documentation are furnished for 

informational use only and subject to change without notice, and should not be 

constructed as a commitment by ASRockInd. ASRockInd assumes no responsibility 

for any errors or omissions that may appear in this documentation.  
With respect to the contents of this documentation, ASRockInd does not provide 

warranty of any kind, either expressed or implied, including but not limited to 

the implied warranties or conditions of merchantability or fitness for a particular 

purpose.
In no event shall ASRockInd, its directors, officers, employees, or agents be liable 

for any indirect, special, incidental, or consequential damages (including damages 

for loss of profits, loss of business, loss of data, interruption of business and the 

like), even if ASRockInd has been advised of the possibility of such damages arising 

from any defect or error in the documentation or product.

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: 

(1)  this device may not cause harmful interference, and 

(2)  this device must accept any interference received, including interference that  

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance 

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the 

California Legislature. When you discard the Lithium battery in California, USA, please 

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

The terms HDMI

®

 and HDMI High-Definition Multimedia Interface, and the HDMI 

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United 

States and other countries.

Содержание UTX-115


































Отзывы: