ASROCK P67 TRANSFORMER - страница 37 Скачать руководство пользователя | Manualshive

Страница: 37 / 61

background image

37

2.16 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.17 Installing

Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit With

RAID

Functions

If you want to install Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS on your

SATA / SATAII / SATA3 HDDs with RAID functions, please follow below procedures
according to the OS you install.

RAID mode is not supported under Windows

®

XP / XP 64-bit OS.

STEP 1: Set up UEFI.

A. Enter UEFI SETUP UTILITY Advanced screen Storage Con guration.
B. Set the option “SATA Mode” to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID confi guration.

Before you start to con  gure the RAID function, you need to check the installation
guide in the Support CD for proper con  guration. Please refer to the document in
the Support CD, “Guide to SATA Hard Disks Installation and RAID Con  guration”,
which is located in the folder at the following path:

.. \ RAID Installation Guide

STEP 3: Install Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS on your

system.

After the installation of Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS, if you want to

manage RAID functions, you are allowed to use both “RAID Installation Guide” and “Intel
Rapid Storage Information” for RAID con guration. Please refer to the document in the
Support CD, “Guide to SATA Hard Disks Installation and RAID Con guration”, which is lo-
cated in the folder at the following path:

.. \ RAID Installation Guide

and the document in

the support CD, “Guide to Intel Rapid Storage”, which is located in the folder at the follow-
ing path:

.. \ Intel Rapid Storage Information

If you want to use “Intel Rapid Storage” in Windows

®

environment,

please install “SATAII driver” from the Support CD again so that “Intel

Rapid Storage” will be installed to your system as well.

«
...
35
36
37
38
39
...
»

Содержание P67 TRANSFORMER -






























































Отзывы:

Нет отзывов

Похожие инструкции для P67 TRANSFORMER -

Бренд: Quick Страницы: 44

Бренд: ECS Страницы: 52

Бренд: MSI Страницы: 19

Бренд: Portwell Страницы: 7

IMBA-G412ISA-R20

Бренд: IEI Technology Страницы: 164

SPC572LADPT100S

Бренд: ST Страницы: 29

Бренд: Microsemi Страницы: 15

Бренд: Tews Technologies Страницы: 26

Бренд: DFI Страницы: 120

Бренд: Gigabyte Страницы: 18

Бренд: Biostar Страницы: 31

Бренд: JETWAY Страницы: 19

Бренд: DFI Страницы: 115

CS631-C246/Q370

Бренд: DFI Страницы: 79

Бренд: DFI Страницы: 107

Бренд: Nuvoton Страницы: 11

Бренд: TYAN Страницы: 130

Бренд: Gigabyte Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды