ASROCK P55DE3, Руководство пользователя

Страница: 54 / 63

5 4 5 4
5 4 5 4
5 4
BIOS SETUP UTILITY
Storage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
SATA Operation Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
eSATAII_5
eSATAII_6
[IDE]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
SATAII 1,2,3,4 Configuration
SATAII 5,6 Configuration [Enhanced]
[Enhanced]
IDE
RAID
AHCI
Disabled
Options
3.4.4 3.4.4
3.4.4 3.4.4
3.4.4 Storage Configuration Storage Configuration
Storage Configuration Storage Configuration
Storage Configuration
SATA Operation Mode
Use this to select SATA Operation Mode. Configuration options: [IDE], [RAID],
[AHCI] and [Disabled]. The default value is [IDE].
If you select [IDE] mode, the options “SATAII 1,2,3,4 Configuration” and
“SATAII 5,6 Configuration” will appear.
If you select [RAID] or [AHCI] mode, the options “Hot Plug” and “Link Power
Management” will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
BIOS SETUP UTILITY
Primary IDE Master
Select the type
of device connected
to the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S . M . A . R . T .
32Bit Data Transfer
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]
Device
[Not Detected]
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction.