ASROCK P55 DELUXE - V1.1 страница 47 Скачать руководство пользователя

Страница: 47 / 75

4 7

2.19

2.19 Driver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical

drive first. Then, the drivers compatible to your system can be auto-detected and

listed on the support CD driver page. Please follow the order from up to bottom

side to install those required drivers. Therefore, the drivers you install can work

properly.

2.20.1 Installing Windows

XP / XP 64-bit With RAID

Functions

If you want to install Windows

XP / XP 64-bit on your SATA / SATAII HDDs with

RAID functions, please follow below steps.

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY

Advanced screen Storage Configuration.

B. Set the option “SATAII Operation Mode” to [RAID].

STEP 2: Make a SATA / SATAII Driver Diskette.

A. Insert the Support CD into your optical drive to boot your system.

B. During POST at the beginning of system boot-up, press <F11> key, and then a

window for boot devices selection appears. Please select CD-ROM as the boot

device.

C. When you see the message on the screen, “Do you want to generate Serial

ATA driver diskette [YN]?”, press <Y>.

D. Then you will see these messages,

Please insert a diskette into the floppy drive.

WARNING! Formatting the floppy diskette will

lose ALL data in it!

Start to format and copy files [YN]?

Please insert a floppy diskette into the floppy drive, and press <Y>.

E. The system will start to format the floppy diskette and copy SATA / SATAII

drivers into the floppy diskette.

2.20

2.20 Installing Windows

Installing Windows

XP / XP 64-bit / Vista

/ Vista

64-bit W

64-bit W ith RAID F

ith RAID F

ith RAID Functions

unctions

If you want to install Windows

XP / XP 64-bit / Vista

/ Vista

64-bit OS on your

SATA / SATAII HDDs with RAID functions, please follow below procedures according to

the OS you install.

Содержание P55 DELUXE - V1.1











































































Результаты поиска

Содержание P55 DELUXE - V1.1

Отзывы:

Похожие инструкции для P55 DELUXE - V1.1

Бренды по названию

Популярные бренды

ASROCK P55 DELUXE - V1.1, Руководство пользователя

Результаты поиска

Содержание P55 DELUXE - V1.1

Отзывы:

Похожие инструкции для P55 DELUXE - V1.1

Бренды по названию

Популярные бренды